
9 November 2026
Jewelry Mould and CAD Fees Explained: What You Pay and When It Is Free
A mould or CAD fee pays for turning your idea into a castable 3D model and a rubber mould. Here is what it covers, what it costs, and when it drops to zero at Ruvolla.
A jewelry mould and CAD fee covers the work of turning your design into a 3D model and a production mould, and many manufacturers charge it once per new design. At Ruvolla there is no modelling or mould fee on production orders of 20 or more pieces per design. If you want a sample first, the modelling and mould are charged once, USD 70 to 150 depending on the piece, and the full amount stays on your account as credit for your next production order.
What the fee actually pays for
When you bring a new design to a manufacturer, nothing exists yet that can go into a casting flask. Two things have to be made before the first silver piece can be poured.
1. The CAD model
A modeller builds your piece in 3D software from whatever you send: an STL or CAD file, a sketch, a photo or an AI image from ChatGPT, Gemini or Midjourney. This is where wall thickness, stone seats, ring size and the space for your logo stamp are decided, and a good model is what lets a piece cast cleanly.
At Ruvolla, the 3D model is sent to you for approval before anything is cast, and we revise it until you are happy with it.
2. The wax print and the mould
The approved model is printed in wax, cast as a master and used to make a rubber mould. From that mould we can inject as many wax copies as the order needs, so every piece in a run (and in every reorder) comes from the same master. That is why the mould matters: it is what makes repeat production fast and consistent.
Typical fee structure at Ruvolla
| Situation | Modelling and mould fee | What happens to the amount |
|---|---|---|
| Production order, 20+ pieces per design | None | Nothing to pay |
| Sample first, before a production order | USD 70 to 150 per design, once | Kept as credit, deducted from your next production order |
| Sample only, no order placed yet | USD 70 to 150 per design, once | Stays on your account until you place a production order |
| Reorder of an existing design (from 5 pieces) | None, no new mould | Same mould is reused |
| Catalogue design (5 pieces, USD 500 first order) | None | Moulds already exist |
The fee depends on the piece: a plain band sits at the lower end, a detailed multi-stone ring higher. We quote it after seeing the design.
Why manufacturers charge it at all
Modelling and mould making are skilled hours spent before any metal is sold. On a large order that cost is absorbed into the per-piece price; on a single sample it cannot be.
Our approach is simple: if you commit to a real production run of 20 or more pieces per design, the modelling and mould are part of the job and you do not see a separate line for them. If you want to hold a sample in your hand first, which is a sensible thing to do with a new design, you pay for the modelling and mould once, and that money is not lost. It becomes credit.
For the full sample process, see Can I get a sample from a jewelry manufacturer before a bulk order?
How the sample credit works
Here is a typical path for a new ring design:
- You send a sketch or AI image with the size and stone you want.
- We model it and send you the 3D renders. You request changes until it is right.
- You order one sample. You pay the modelling and mould fee (for example USD 110) plus the piece.
- The sample is made in about a week and shipped to you.
- You order 20 pieces of that design. The USD 110 comes off that production order.
If you take the sample and do not place a 20-piece order straight away, the credit does not expire into nothing. It stays on your account and is used on your next production order. The fee is not paid back in cash, but you do not pay it twice.
Reorders: no new mould, lower minimum
Once a design has been produced, the mould is in our workshop. A reorder does not need new modelling or a new mould, so there is no mould fee on reorders, and the minimum drops to 5 pieces per design. This is useful for small brands: the first run proves the design, and later runs can follow real sales instead of a guess.
Who owns the mould and the CAD file
You do. The CAD files and moulds made for your design belong to you. They are used only for your orders, they are never shown in our catalogue or offered to other buyers, and we can hand the files over if you ask. If you have an NDA, we review and sign it.
We go into this in more detail in Will a jewelry manufacturer sell my designs?
Things that are not a separate fee
Already included in custom production with us:
- Logo stamp: free on custom orders. It goes next to the 925 hallmark, or inside a ring band, and its size and depth are shown in the 3D model.
- 3D revisions: we revise the model until you approve it.
- Plating in our own workshop: gold in a 14K or 18K tone, rose gold or rhodium, priced into the piece. If you need a stated thickness, see our gold plating micron guide.
The per-piece price itself depends on the weight of the piece, the stones and the plating, so we quote it after seeing the design.
Where the work is done
Modelling, wax printing, casting, stone setting, polishing, plating and quality control all happen in our own workshop in Fatih, Istanbul, near the Grand Bazaar, backed by more than 15 years of casting experience. Because the mould never leaves our hands for a subcontractor, we can keep it for your reorders and keep your design private. More on the full process on our custom jewelry manufacturing and private label jewelry pages.
To see the fee and the unit price for your own piece, upload a picture to the AI price estimate; the report shows both.
Frequently asked questions
How much is a jewelry mould fee?
At Ruvolla, modelling and mould together cost USD 70 to 150 per design when you order a sample first, depending on how complex the piece is. On production orders of 20 or more pieces per design, there is no modelling or mould fee.
Is the sample mould fee refunded?
Not in cash. It stays on your account as credit and is deducted from your next production order of that design, so you never pay for the same mould twice.
Do I pay a mould fee again when I reorder?
No. The mould from your first run is kept in our workshop and reused. Reorders start from 5 pieces per design with no new mould fee.
Can I take my CAD file and moulds to another manufacturer?
Yes. The CAD files and moulds belong to you, and we hand the files over on request. They are used only for your orders while they are with us.
Is there a mould fee on catalogue designs?
No. Catalogue designs already have moulds. Catalogue orders start at 5 pieces per design with a USD 500 first order.
Do I need a sample before ordering 20 pieces?
No. You can approve the 3D model and go straight to production, in which case there is no modelling or mould fee. A sample is optional and mainly useful for checking size, weight and finish on a new design.
Get a quote for your design
Send us your design (an image, sketch or CAD file) and the quantity per design, and we will reply with the modelling and mould fee, if any, and a per-piece price. Email help@ruvolla.com, message us on WhatsApp at +90 540 281 15 53, or use the quote form.


