925 sterling silver from our own workshop · Trade onlyWholesale guide →
RUVOLLASilver Wholesale
Trade login
Do I Need REACH or EN 1811 Testing for Silver Jewelry in the EU?

9 November 2026

Do I Need REACH or EN 1811 Testing for Silver Jewelry in the EU?

A plain-language guide for jewelry brands: the REACH nickel restriction, the EN 1811 release test, what a 925 or XRF report can and cannot prove, and how to arrange testing.

If you sell jewelry in the EU, your pieces must meet the REACH restriction on nickel release, and EN 1811 is the standard test method used to check it. There is no blanket rule that every item needs a test report, but whoever places the jewelry on the EU market is responsible for compliance, and a test report is the clearest way to show it. Ruvolla does not hold ready-made REACH or EN 1811 reports. On request, testing can be arranged at an accredited laboratory on your own design, and every order comes with a 925 test report for a piece you select and an XRF plating report.

This article is general information for jewelry brands, not legal advice. Rules change and differ by product, so check the current requirements with a compliance adviser or a testing laboratory before you sell.

What REACH says about jewelry

REACH is the EU regulation on chemicals. Its Annex XVII lists substances that are restricted in certain products, and several entries apply to jewelry:

  • Nickel. Items in direct and prolonged contact with the skin, such as rings, bracelets, necklaces and earrings, must not release nickel above set limits. Post assemblies that go into pierced ears or other piercings have a stricter limit than other jewelry. The limits are expressed as a release rate: 0.2 µg/cm² per week for piercing posts and 0.5 µg/cm² per week for other items in prolonged skin contact.
  • Lead and cadmium. REACH also limits lead and cadmium in jewelry and its metal parts.

The nickel rule is about how much nickel is released onto the skin, not simply whether nickel is present. That is why it needs a specific test.

What EN 1811 tests

EN 1811 is the European standard method for measuring nickel release from items that touch the skin. The piece is placed in an artificial sweat solution for a set period, and the laboratory measures how much nickel has moved into the solution. The result is compared with the REACH limit.

For plated or coated pieces, laboratories often run a wear and corrosion step first (EN 12472), to simulate the coating being worn over time, and then apply EN 1811. Always ask the laboratory to test against the current version of EN 1811 and to state which version they used in the report.

What a 925 test and an XRF report show, and what they do not

Brands often ask whether the reports that come with an order are enough. They are useful, but they answer different questions.

ReportWhat it showsWhat it does not show
925 test reportThat the silver alloy meets 925 finenessWhether the piece releases nickel, lead or cadmium above REACH limits
XRF plating reportThe plating on the piece, such as the gold layer and its thicknessHow much of any metal is released onto skin over time
EN 1811 test reportNickel release from the tested item, compared with the REACH limitSilver fineness or plating thickness

In short, a 925 or XRF report describes what the piece is made of. An EN 1811 report describes what the piece releases. A composition result does not replace a release test, so do not present a 925 or XRF report as proof of REACH compliance.

How it works at Ruvolla

Reports with every order

  • A 925 test report for a piece you select from your order. Every piece is also stamped 925.
  • An XRF plating report, which is especially useful if you sell micron-plated or vermeil pieces.
  • If you sell gold vermeil, a document confirming 2.5 microns or more.

See our quality and plating page for finishes and checks.

REACH and EN 1811 on request

We do not hold ready-made REACH or EN 1811 reports for our catalogue. If you need one, tell us before production. Testing can be arranged at an accredited laboratory on your own design, so the report covers the exact piece you sell, with the plating and stones you chose.

Testing your own design makes sense for a few reasons:

  • A report covers the item that was tested. A report on a different design, plating or finish does not describe your piece.
  • Plating, stones and findings can all affect results, so the test should match your final specification.
  • Marketplaces and retail buyers increasingly ask for reports that match the product they list.

This fits naturally with custom manufacturing and private label orders, where the design and finish are fixed before production. If you start with a sample, you can use it to plan testing before your main order; see can I get a sample from a jewelry manufacturer.

What we do not issue

We do not issue UK compliance certificates. If you sell in the UK, check the UK requirements separately with a compliance adviser or laboratory.

A simple compliance checklist for EU sellers

  1. Know your role. If you import the jewelry into the EU or sell it under your brand, you are generally responsible for its compliance.
  2. List your designs by risk. Earrings with posts and pieces in long skin contact deserve the most attention.
  3. Decide what to test. Test the final design, with the plating and findings you will actually sell.
  4. Use an accredited laboratory and ask for the current version of EN 1811 to be named in the report.
  5. Keep your records. File the 925 report, the XRF report and any EN 1811 report with the order.
  6. Write careful listings. Describe the materials accurately, for example "18K gold vermeil on 925 sterling silver", and avoid skin or allergy claims you cannot support with test results on that exact piece.

Frequently asked questions

Is EN 1811 testing legally required for every piece?

REACH sets the nickel release limit, and EN 1811 is the standard way to check it. The law does not require a report for every item, but the seller placing the jewelry on the EU market must make sure it complies, and a test report is the usual way to show that. Check your own case with a compliance adviser.

Does 925 sterling silver automatically pass REACH?

You should not assume it does. A 925 report confirms silver fineness, not nickel release. Only a release test on the finished piece answers the REACH nickel question.

Can an XRF report replace an EN 1811 test?

No. XRF shows what the surface is made of and how thick the plating is. EN 1811 measures nickel released into artificial sweat. They answer different questions.

Do you have REACH or EN 1811 reports for your catalogue?

No. We do not hold ready-made reports. On request, testing can be arranged at an accredited laboratory on your own design.

What reports come with my order?

A 925 test report for a piece you select and an XRF plating report. For vermeil, a document confirming 2.5 microns or more.

Plan testing with your order

Tell us which designs you want tested and where you sell, ideally before production starts. Email help@ruvolla.com, message us on WhatsApp at +90 540 281 15 53, or use the custom quote form. For general questions, see the wholesale FAQ.

Order list

Your cart is empty

Continue shopping to add items