925 sterling silver from our own workshop · Trade onlyWholesale guide →
RUVOLLASilver Wholesale
Trade login
Can a Manufacturer Stamp Your Logo on Small Rings and Earrings?

9 November 2026

Can a Manufacturer Stamp Your Logo on Small Rings and Earrings?

Yes, even small rings and earrings can carry your logo. Here is where it fits, how the size is set in the 3D model, what happens to fine monograms, and what it costs.

Yes. A manufacturer can put your logo on small jewelry such as rings, studs and pendants, as long as the logo is sized to the space the piece actually has. At Ruvolla, the logo stamp is free on custom orders: we place it next to the 925 stamp, inside the ring band or anywhere else that is technically possible on the model, show you its exact size and position in the 3D model before casting, and send you photos of the finished pieces.

Why a logo stamp matters for a small brand

A logo inside a ring or on the back of a pendant is small, but it does a lot of work. It tells your customer the piece was made for your brand, it separates your stock from generic pieces sold elsewhere, and it makes your jewelry recognisable when it is resold or gifted. For a private label jewelry line, it is often the detail that turns a well-made piece into a branded product.

The challenge is space. A stud earring or a thin ring band has only a few millimetres of flat surface, so the logo has to be planned with the piece, not added as an afterthought.

Where your logo can go

Every piece has a few natural spots for a mark. The right one depends on the shape of the model, and we suggest the best option when we draw it.

PieceCommon logo positionNotes
RingInside the bandThe most common place. It sits next to or near the 925 stamp and is hidden while worn.
PendantOn the backA flat back gives the most room, so pendants can usually carry the largest logo.
Stud and hoop earringsOn the back of the front part, or on the hoopSpace is tight, so the logo is usually small and simple.
BraceletOn the clasp area or the inside surfaceDepends on the clasp and band shape.
Necklace and chainOn a small logo plate near the claspA plate gives a clean, visible brand mark on chains that have no flat surface.
Any pieceNext to the 925 stampEvery Ruvolla piece is stamped 925, and your logo can sit beside it.

A logo plate on the chain end

Chains and fine necklaces rarely have room for a mark, so many brands add a small plate with their logo close to the clasp. The plate is a small custom part in itself, so its price is set once its design is prepared. Tell us the shape you have in mind, such as round, rectangular or a tag, and we include it in your quote.

How the size and depth are decided

There is no single standard size for a logo stamp. The size and depth are adjusted to the free area on each piece, so a pendant back can carry a larger mark than the inside of a slim ring.

This is decided in the 3D model, not at the casting stage. When we send the 3D renderings of your custom piece for approval, the logo is already placed on them, so you can see:

  • Where it sits, for example centred inside the band or near the clasp.
  • How large it is in relation to the piece.
  • How deep it is, so the mark stays readable after polishing and plating.

If you want it bigger, smaller or moved, we revise the model until you are happy. Nothing is cast before your approval. The same applies to the rest of the design, as explained in our custom jewelry manufacturing process.

What happens to fine lines and detailed monograms

Some logos are built from very thin lines, small letters or overlapping shapes. At jewelry scale, these details can blur together once the piece is cast, polished and plated. When that happens, we simplify the logo slightly so it stays sharp at the size available, for example by thickening thin strokes or removing a fine outline.

You see any change first in the 3D model, next to your original logo. If you prefer, you can also send us a simplified version of your mark, such as an initial or a symbol, for the smallest pieces and keep the full logo for pendants and plates.

What file to send us

A clean logo file makes the result sharper and saves a revision round.

  • Vector files are best: SVG, AI, EPS or a vector PDF. They can be scaled to any size without losing edges.
  • A high-resolution PNG or JPG also works if you have no vector file. We trace it during modelling.
  • One colour is enough. A stamp has no colour, so send the mark in solid black on a white background.
  • Tell us if you have a short version of your logo, such as initials, for very small pieces.

What it costs

On custom and private label orders, the logo stamp is free. It is added to the 3D model as part of the design work, and on production orders of 20 pieces or more per design there is no modelling or mould fee either. If you want a sample first, the modelling and mould fee is charged once, USD 70 to 150 depending on the piece, and it is credited back to your next order. Our guide to getting a sample from a jewelry manufacturer explains this step.

ItemCost on custom orders
Logo stamp on the pieceFree
Modelling and mould, 20+ pieces per designFree
Modelling and mould for a sampleUSD 70 to 150, credited back to your next order
Logo plate for chainsQuoted once the plate design is prepared

After production

When your order is finished, we send you photos of the pieces so you can check the logo before shipping. Your logo, 3D files and moulds belong to you and are used only for your orders. Read more in design ownership, moulds and exclusivity.

Frequently asked questions

Can you put a logo inside a thin ring?

Yes, in most cases. The size and depth of the logo are adjusted to the width of the band, and you see the result in the 3D model before anything is cast.

Is the logo stamp free?

Yes, on custom and private label orders the logo stamp is free of charge. A separate logo plate for chains is quoted once its design is prepared.

Can my logo go next to the 925 stamp?

Yes. Every piece we make is stamped 925, and your logo can be placed beside it, inside a ring band or on the back of a pendant, for example.

What if my logo has very fine details?

We simplify it slightly so it stays readable at small sizes, for example by thickening thin lines. You approve the simplified version in the 3D model first.

What file format should I send?

A vector file such as SVG, AI, EPS or PDF is best. A high-resolution PNG or JPG also works, and we trace it during modelling.

Will I see the logo before shipping?

Yes. You see it in the 3D model before casting, and we send photos of the finished pieces before they ship.

Send us your logo and design

Email your logo and your design to help@ruvolla.com, or message us on WhatsApp at +90 540 281 15 53, with the quantity you have in mind per design. You can also use the custom quote form. For common trade questions, see our wholesale FAQ.

Order list

Your cart is empty

Continue shopping to add items